Template:Infobox connector/doc

From IxWiki
Jump to navigation Jump to search

Template:Infobox connector is an infobox for electrical and (audio/video) signal connectors of all kinds.

The template supports three images:

  • image, logo, pinout_image

Image and logo share a 300 pixel wide area - so if both are used then the width of the image should be set to 150 pixels, that is, [[Image:example.jpg|150px]]. If only image and pinout are used, then the size of both should be 300 pixels.

Usage

{{{name}}}
{{{logo}}}{{{image}}}
{{{caption}}}
Type {{{type}}}
Production history
Designer {{{designer}}}
Designed {{{design_date}}}
Manufacturer {{{manufacturer}}}
Produced {{{production_date}}}
Superseded {{{superseded}}}
Superseded by {{{superseded_by}}} ({{{superseded_by_date}}})
General specifications
Weight {{{weight}}}
Length {{{length}}}
Diameter {{{diameter}}}
Width {{{width}}}
Height {{{height}}}
Hot pluggable {{{hotplug}}}
Daisy chain {{{daisy_chain}}}
External {{{external}}}
Audio signal {{{audio_signal}}}
Video signal {{{video_signal}}}
Cable {{{cable}}}
Passband {{{passband}}}
Pins {{{num_pins}}}
Connector {{{physical_connector}}}
Electrical
Signal {{{electrical}}}
Earth {{{earth}}}
Max. voltage {{{maximum_voltage}}}
Max. current {{{maximum_current}}}
Data
Data signal {{{data_signal}}}
Width {{{data_bit_width}}}
Bitrate {{{data_bandwidth}}}
Max. devices {{{data_devices}}}
Protocol {{{data_style}}}
Pin out
{{{pinout_image}}}
{{{pinout_caption}}}
{{{pinout_image2}}}
{{{pinout_caption2}}}
Pin {{{pinout_col1_name}}} {{{pinout_col2_name}}}
Pin 1 {{{pin1_name}}} {{{pin1}}}
Pin 2 {{{pin2_name}}} {{{pin2}}}
Pin 3 {{{pin3_name}}} {{{pin3}}}
Pin 4 {{{pin4_name}}} {{{pin4}}}
Pin 5 {{{pin5_name}}} {{{pin5}}}
Pin 6 {{{pin6_name}}} {{{pin6}}}
Pin 7 {{{pin7_name}}} {{{pin7}}}
Pin 8 {{{pin8_name}}} {{{pin8}}}
Pin 9 {{{pin9_name}}} {{{pin9}}}
Pin 10 {{{pin10_name}}} {{{pin10}}}
Pin 11 {{{pin11_name}}} {{{pin11}}}
Pin 12 {{{pin12_name}}} {{{pin12}}}
Pin 13 {{{pin13_name}}} {{{pin13}}}
Pin 14 {{{pin14_name}}} {{{pin14}}}
Pin 15 {{{pin15_name}}} {{{pin15}}}
Pin 16 {{{pin16_name}}} {{{pin16}}}
Pin 17 {{{pin17_name}}} {{{pin17}}}
Pin 18 {{{pin18_name}}} {{{pin18}}}
Pin 19 {{{pin19_name}}} {{{pin19}}}
Pin 20 {{{pin20_name}}} {{{pin20}}}
Pin 21 {{{pin21_name}}} {{{pin21}}}
Pin 22 {{{pin22_name}}} {{{pin22}}}
Pin 23 {{{pin23_name}}} {{{pin23}}}
Pin 24 {{{pin24_name}}} {{{pin24}}}
Pin 25 {{{pin25_name}}} {{{pin25}}}
Pin 26 {{{pin26_name}}} {{{pin26}}}
Pin 27 {{{pin27_name}}} {{{pin27}}}
Pin 28 {{{pin28_name}}} {{{pin28}}}
Pin 29 {{{pin29_name}}} {{{pin29}}}
Pin 30 {{{pin30_name}}} {{{pin30}}}
Pin 31 {{{pin31_name}}} {{{pin31}}}
Pin 32 {{{pin32_name}}} {{{pin32}}}
Pin 33 {{{pin33_name}}} {{{pin33}}}
Pin 34 {{{pin34_name}}} {{{pin34}}}
Pin 35 {{{pin35_name}}} {{{pin35}}}
Pin 36 {{{pin36_name}}} {{{pin36}}}
Pin 37 {{{pin37_name}}} {{{pin37}}}
Pin 38 {{{pin38_name}}} {{{pin38}}}
Pin 39 {{{pin39_name}}} {{{pin39}}}
Pin 40 {{{pin40_name}}} {{{pin40}}}
{{{pin_custom1_name}}} {{{pin_name_custom1}}} {{{pin_custom1}}}
{{{pin_custom2_name}}} {{{pin_name_custom2}}} {{{pin_custom2}}}
{{{pin_custom3_name}}} {{{pin_name_custom3}}} {{{pin_custom3}}}
{{{pin_custom4_name}}} {{{pin_name_custom4}}} {{{pin_custom4}}}
{{{pin_custom5_name}}} {{{pin_name_custom5}}} {{{pin_custom5}}}
{{{pin_custom6_name}}} {{{pin_name_custom6}}} {{{pin_custom6}}}
{{{pin_custom7_name}}} {{{pin_name_custom7}}} {{{pin_custom7}}}
{{{pin_custom8_name}}} {{{pin_name_custom8}}} {{{pin_custom8}}}
{{{pinout_notes}}}
{{Infobox connector
| name               = 
| type               = 
| image              = 
| logo               = 
| caption            = 
| designer           = 
| design_date        = 
| manufacturer       = 
| production_date    = 
| superseded         = 
| superseded_by      = 
| superseded_by_date = 
| weight             = 
| length             = 
| diameter           = 
| width              = 
| height             = 
| hotplug            = 
| daisy_chain        = 
| external           = 
| electrical         = 
| earth              = 
| maximum_voltage    = 
| maximum_current    = 
| audio_signal       = 
| video_signal       = 
| data_signal        = 
| data_bit_width     = 
| data_bandwidth     = 
| data_devices       = 
| data_style         = 
| cable              = 
| high_freq          = 
| physical_connector = 
| num_pins           = 
| pinout_col1_name   = 
| pinout_col2_name   = 
| pinout_image       = 
| pinout_caption     = 
| pinout_image2      = 
| pinout_caption2    = 
| pin1               = 
| pin1_name          = 
| pin2               = 
| pin2_name          = 
| pin3               = 
| pin3_name          = 
| pin4               = 
| pin4_name          = 
| pin5               = 
| pin5_name          = 
| pin6               = 
| pin6_name          = 
| pin7               = 
| pin7_name          = 
| pin8               = 
| pin8_name          = 
| pin9               = 
| pin9_name          = 
| pin10              = 
| pin10_name         = 
| pin11              = 
| pin11_name         = 
| pin12              = 
| pin12_name         = 
| pin13              = 
| pin13_name         = 
| pin14              = 
| pin14_name         = 
| pin15              = 
| pin15_name         = 
| pin16              = 
| pin16_name         = 
| pin17              = 
| pin17_name         = 
| pin18              = 
| pin18_name         = 
| pin19              = 
| pin19_name         = 
| pin20              = 
| pin20_name         = 
| pin21              = 
| pin21_name         = 
| pin22              = 
| pin22_name         = 
| pin23              = 
| pin23_name         = 
| pin24              = 
| pin24_name         = 
| pin25              = 
| pin25_name         = 
| pin26              = 
| pin26_name         = 
| pin27              = 
| pin27_name         = 
| pin28              = 
| pin28_name         = 
| pin29              = 
| pin29_name         = 
| pin30              = 
| pin30_name         = 
| pin31              = 
| pin31_name         = 
| pin_custom1_name   = 
| pin_name_custom1   = 
| pin_custom1        = 
| pin_custom2_name   = 
| pin_name_custom2   = 
| pin_custom2        = 
| pin_custom3_name   = 
| pin_name_custom3   = 
| pin_custom3        = 
| pin_custom4_name   = 
| pin_name_custom4   = 
| pin_custom4        = 
| pin_custom5_name   = 
| pin_name_custom5   = 
| pin_custom5        = 
| pin_custom6_name   = 
| pin_name_custom6   = 
| pin_custom6        = 
| pin_custom7_name   = 
| pin_name_custom7   = 
| pin_custom7        = 
| pin_custom8_name   = 
| pin_name_custom8   = 
| pin_custom8        = 
| pinout_notes       = 
}}

Example

D4 Video connector
This example is not factual – it is purely illustrative of the infobox.
Type Analogue video connector
Production history
Designer Some guy
Designed Early 1990s
Manufacturer Initially Toshiba
Produced Early 1990s to 2005
Superseded RF connector
Superseded by DVI connector (2005)
General specifications
Length 36 mm (typical)
Width 25 mm
Height 6.5 mm
Hot pluggable Yes
External External
Audio signal None
Video signal Analogue 480i, 480p, 720p, 1080i
Cable 14 core shielded (25 m max)
Passband 0–20 GHz
Pins 14 (6 video, 3 reserved, 2 detect, 3 data)
Connector DB-25
Electrical
Signal 220 volts AC 50 Hz typically
Earth Dedicate pin
Max. voltage 450 volts peak
Max. current 20 amps at 220 volts, 5 amps at 400 volts
Data
Data signal Resolution and Aspect ratio only
Width 2 bits
Bitrate 120 bit/s
Max. devices 1
Protocol Serial
Pin out
A male connector seen from the front.
Pin Spec name Example col title
Pin 1 Y luminance (0.7 V, 75 Ω)
Pin 2 Y GND Y ground
Pin 3 Pb 0.35 V, 75 Ω
Pin 4 Pb GND
Pin 5 Pr 0.35 V, 75 Ω
Pin 6 Pr GND
Pin 7 Reserve link 1
Pin 8 Data line 1 0 V = 525 lines
2.2 V = 750 lines
5 V = 1125 lines
Pin 9 Data line 2 0 V = 59.94i / 60i
5 V = 59.94p / 60p
Pin 10 Reserve link 2
Pin 11 Data line 3 0 V = 4:3
2.2 V = 4:3 letterbox
5 V = 16:9
Pin 12 Plug insert detect ground
Pin 13 Reserve link 3
Pin 14 Plug insert detect output 10 kΩ, input > 100 kΩ
C1 BLUE Analog Blue Video
C2 GREEN Analog Green Video
C3 HA_SYNC Analog Horizontal Sync
C4 RED Analog Red Video
C5 RETURN Analog RGB Return and DDC Return
C6 AR_PRE Acid reflux preventer
C7 AR_ENC Acid reflux encourager
C8 CHRO Churro presence detect
These are some notes about the pinout of this connector. The pins are razor sharp.
{{Infobox connector
| name = D4 Video connector
| image = [[File:SCART 20050724 002.jpg|150px]]
| logo = [[File:D4 connector.png|150px]]
| caption = This example is not factual – it is purely illustrative of the infobox.
| type = [[analog electronics|Analogue]] video connector
| designer = Some guy
| design_date = Early 1990s
| manufacturer = Initially [[Toshiba]]
| production_date = Early 1990s to 2005
| superseded = [[RF connector]]
| superseded_by = [[DVI connector]]
| superseded_by_date = 2005
| external = External
| hotplug = Yes
| length = 36 mm (typical)
| width = 25 mm
| height = 6.5 mm
| electrical = 220 volts AC 50 Hz typically
| earth = Dedicate pin
| maximum_voltage = 450 volts peak
| maximum_current = 20 amps at 220 volts, 5 amps at 400 volts
| audio_signal = None
| video_signal = [[analog signal|Analogue]] [[480i]], [[480p]], [[720p]], [[1080i]]
| data_signal = Resolution and [[Aspect ratio (image)|Aspect ratio]] only
| data_bit_width = 2 bits
| data_bandwidth = 120 bit/s
| data_devices = 1
| data_style = [[Serial communications|Serial]]
| physical_connector = DB-25
| cable = 14 core shielded (25 m max)
| passband = 0–20 GHz
| num_pins = 14 (6 video, 3 reserved, 2 detect, 3 data)
| pinout_image = [[File:D4 connector.png|300px]]
| pinout_caption = A male connector seen from the front.
| pinout_col1_name = Spec name
| pinout_col2_name = Example col title
| pin1 = [[Luminance (video)|luminance]] (0.7 V, 75 Ω)
| pin1_name = Y
| pin2 = Y [[Ground (electricity)|ground]]
| pin2_name = Y GND
| pin3 = 0.35 V, 75 Ω
| pin3_name = Pb
| pin4 = 
| pin4_name = Pb GND
| pin5 = 0.35 V, 75 Ω
| pin5_name = Pr
| pin6 = 
| pin6_name = Pr GND
| pin7 = Reserve link 1
| pin7_name = 
| pin8 = 0 V = 525 lines<br /> 2.2 V = 750 lines<br /> 5 V = 1125 lines
| pin8_name = Data line 1
| pin9 = 0 V = 59.94i / 60i<br /> 5 V = 59.94p / 60p
| pin9_name = Data line 2
| pin10 = Reserve link 2
| pin10_name = 
| pin11 = 0 V = 4:3 <br /> 2.2 V = 4:3 letterbox <br /> 5 V = 16:9
| pin11_name = Data line 3
| pin12 = 
| pin12_name = Plug insert detect ground
| pin13 = Reserve link 3
| pin13_name = 
| pin14 = output 10 kΩ, input > 100 kΩ
| pin14_name = Plug insert detect
| pin_custom1_name = C1
| pin_name_custom1 = BLUE
| pin_custom1 = Analog Blue Video
| pin_custom2_name = C2
| pin_name_custom2 = GREEN
| pin_custom2 = Analog Green Video
| pin_custom3_name = C3
| pin_name_custom3 = HA_SYNC
| pin_custom3 = Analog Horizontal Sync
| pin_custom4_name = C4
| pin_name_custom4 = RED
| pin_custom4 = Analog Red Video
| pin_custom5_name = C5
| pin_name_custom5 = RETURN
| pin_custom5 = Analog RGB Return and DDC Return
| pin_custom6_name = C6
| pin_name_custom6 = AR_PRE
| pin_custom6 = [[Acid reflux]] preventer
| pin_custom7_name = C7
| pin_name_custom7 = AR_ENC
| pin_custom7 = Acid reflux encourager
| pin_custom8_name = C8
| pin_name_custom8 = CHRO
| pin_custom8 = Churro presence detect
| pinout_notes = These are some notes about the pinout of this connector. The pins are razor sharp.
}}


Retrieved from "https://ixwiki.com/index.php?title=Template:Infobox_connector/doc&oldid=1105"