Template:Infobox Australian place/doc

Template:Infobox Australian place/pagelinks

Purpose

{{Infobox Australian place}} is used to add infoboxes to articles on places in Australian states and territories. It is not limited to populated places such as cities, towns and suburbs, but may be used on any place including regions, local government areas, cadastral units, protected areas and even some areas that do not fall into any of the preceding descriptions and for which no other infobox is appropriate. It is the standard infobox used in Australian articles. Australian articles using {{Infobox settlement}} should be converted to use this infobox.

The infobox has been extensively customised for Australia and includes automation that results in some parameters being redundant to other parameters. For example, if a population density (in the density field) is not specified, this will be automatically generated based on the pop and area fields. It is therefore important to read parameter descriptions thoroughly, to avoid unnecessarily providing redundant or incorrect information.

For infoboxes that require reformatting, general cleanup or addition of missing fields, Template:Infobox Australian place/cleanup may be substed. This will reformat the infobox and remove invalid fields.

Usage

To use this template

1. Copy the relevant blank template from the Blank infobox page into the beginning of your document, remembering to put the code at the very top of the article and the first word of the article on the very next line.
2. Enter values for the fields as outlined in the table below. Fields left blank will automatically be hidden.
3. Preview.
4. Save the page with an appropriate edit summary.

Examples

• Examples of this template can be found on the examples page.

Parameters

Both type and state are required parameters. All other parameters used by this template are optional. The following are available:

Parameter	Description	Valid for blank = all	Source/notes	Values
type	infobox type		Sets up the template for a specific type of locality. Should be set to other when the place is not one of the defined types.	"city", "suburb", "town", "lga", "region", "cadastral", "protected" or "other"
name	name of place		If this field does not exist, the template will use the name of the article. If the field exists, but the place name is not defined, the infobox title will be blank.	plain text
city	city name	suburb	See List of cities in Australia.In some cases it may be desirable to include the name of a non-city here. In any case, if the name is not wikilinked, it will automatically be linked.	plain text, may be linked.
state	state or territory abbreviation		Abbreviation for the state or territory. For consistency, lower case is preferred, but upper case may be used. When a state code is not applicable, "au" should be used, although the field may be left blank.	"qld", "nsw", "act", "vic", "tas", "sa", "wa", "nt", or use "au" for Australia – plain text, do not link
iucn_category	IUCN category	protected area	This field should be populated with the IUCN category associated with the protected area. Although optional, use of this field is strongly recommended. For more information on how this field is displayed, see IUCN Categories below.	Ia, Ib, II, III, IV, V, or VI (plain text, do not wikilink)
iucn_ref	IUCN category reference	protected area	Reference for the iucn_category field	wikitext (can contain links) Best when used with <ref> </ref> tags and {{cite web}}
image	generic image of the locality		For cadastral units, this is typically a map showing the location of the cadastral unit within the state or territory.	filename
image_upright	width of generic image of the locality		upright=1.23, which is approximately 270px if the default thumbnail size has not been changed at Special:Preferences) The size should not be set to a value that would result in an image width greater than 300px. See help below for guidance on determining the value to be used.	number
caption	caption for the locality image			wikitext (can contain links)
image_alt			Alt text for the image	wikitext (can contain links)
image2	A second image of the locality		In LGA articles this is typically used where a map of the LGA is required but the appropriate locator map template is not available in Category:Australia location map templates.	filename
image2_upright	width of the second image of the locality		upright=1.23, which is approximately 270px if the default thumbnail size has not been changed at Special:Preferences) The size should not be set to a value that would result in an image width greater than 300px. See help below for guidance on determining the value to be used.	number
caption2	caption for the second locality image			wikitext (can contain links)
image2_alt			Alt text for the image	wikitext (can contain links)
coordinates	coordinates of the locality		For coordinates, use {{coord}} with display=inline,title. Please do not be overly precise.	Example: {{Coord|32|45|41.3|S|151|44|38.6|E|type:city_region:AU-NSW|display=inline,title}}
map_scale	changes scale of map		The scale of the map linked to in the generated coordinates string can be changed from the default by setting this field.	unformatted number. See {{coord}} for examples.
map_type	controls the location map		set to nomap to suppress any automatically generated location map	nomap, auto, or blank
alternative_location_map	forces locator map		Forces the locator map to use an alternative, rather than the state map, regardless of the contents of state.	Name of the alternative map
force_national_map	forces locator map	city, region, protected	Forces the locator map to use the Australian, rather than the state map, regardless of the contents of state.	"yes" or leave blank, plain text, do not link
use_lga_map	forces locator map	suburb, lga, protected	Forces the locator map to use the lga map. For this to work, both state and lga must be set to the correct parameters.	"yes" or leave blank, plain text, do not link
relief	forces relief map			"yes" or leave blank, plain text, do not link
pushpin_map_caption	caption			optional, plain text or linked
pushpin_label_position	label position			left, right, top, bottom default: left
map_alt			Alt text for the location map	wikitext (can contain links)
local_map	enable map of local area		local_map=yes enables a map of the local area below the main locator map. In order for the map to display properly, the current location must be connected to a Wikidata entry and a map border must have been created on OpenStreetMap. If these have not happened, the map will not display correctly.	"yes" or leave blank, plain text, do not link
zoom	change zoom size of local map		Setting this field to a value between 1 and 18 adjusts the zoom of the displayed map. The default zoom value is 10. For more information see {{Infobox mapframe}} instructions.	numeric value between 1 and 18.
local_map_id	Wikidata id	use of infobox on "other" pages	Normally, this field is unnecessary. However, if it is necessary to use the infobox on a page that is not connected to a Wikidata entry, including this field with a Wikidata id (e.g. local_map_id = Q595259) will display a map for that locality, if one exists.	Wikidata id. e.g. Q595259
nearest_town_or_city	nearest town or city to the area	protected	If the area is not within a town or city, the nearest town or city to the area can be listed here. If only one, wikilinking may be omitted as the article will be automatically linked. If there are more than one, use {{Plainlist}}.	wikitext (can contain links)
pop	population	all except protected; use approx for region	ABS (generic) 2016 Census QuickStats Do not add anything else to this field (years, references etc.)	number. should be plain, either with or without a comma. i.e. 12345 or 12,345
pop_year	population year	all except protected; use approx for region	Year applicable to the population figure	number When the population is for a census year, use {{CensusAU}}
pop_footnotes	population footnote for references	all except protected; use approx for region	ABS (generic) 2016 Census QuickStats	wikitext (can contain links) Best when used with <ref> </ref> tags and {{Census 2016 AUS}}
pop2	2nd population figure	all except protected; use approx for region	ABS (generic) 2016 Census QuickStats Do not add anything else to this field (years, references etc.) In some articles it may be necessary to provide a second population figure. (see Clarence Town, New South Wales for an example) Use pop2, pop2_year and pop2_footnotes for the second figure.	number. should be plain, either with or without a comma. i.e. 12345 or 12,345
pop2_year	2nd population year	all except protected; use approx for region	Year applicable to the population figure	number When the population is for a census year, use {{CensusAU}}
pop2_footnotes	population footnote for pop2 references	all except protected; use approx for region	ABS (generic) 2016 Census QuickStats	wikitext (can contain links) Best when used with <ref> </ref> tags and {{Census 2016 AUS}}
poprank	population rank	city	Used with pop List of cities in Australia by population	number
density	population density	city, region	ABS	unformatted number (people/km²)
density_footnotes	population density footnote for references	city, region	ABS	wikitext (can contain links) Best when used with <ref> </ref> tags and {{cite web}}
established	established		Date the location was established. If the exact date is unknown, a year will suffice	date
established_footnotes	reference(s) for establishment date			wikitext (can contain links) Best when used with <ref> </ref> tags and {{cite web}}
abolished	abolished		Date the location was abolished. If the exact date is unknown, a year will suffice	date
gazetted	Date the place name was gazetted			date
postcode		suburb, town	Australia Post postcode search tool	number
elevation	measured from sea level in metres	suburb, town		unformatted number (m)
elevation_footnotes	elevation footnote for references	suburb, town		wikitext (can contain links) Best when used with <ref> </ref> tags and {{cite web}}
area			ABS	unformatted number (km2)
area_footnotes	area footnote for references		ABS	wikitext (can contain links) Best when used with <ref> </ref> tags and {{cite web}}
timezone	timezone	city, suburb, town, lga, region	See Time in Australia	plain text, link
utc	utc offset	city, suburb, town, lga, region		"+" followed by number
timezone-dst	summer timezone	city, suburb, town, lga, region	See Time in Australia	plain text, link
utc-dst	summer utc offset	city, suburb, town, lga, region		"+" followed by number
mayor	Mayor of LGA	lga	Name of the mayor only. Do not include titles, postnominals or political party information.	plain text
mayortitle	Title of the mayor	lga		Wiki text. If omitted (but mayor is provided), defaults to "Mayor". Otherwise likely to be "Lord Mayor", "President" or "Chairman" (etc.). The text can include a link to a list of mayors etc.
dist#	See Notes below	city, suburb, town (other cities)	Distance by road, not direct – maps, Google earth, whereis (get directions), Route planner – Victoria, Australia	unformatted number (km)
dir#	See Notes below	city, suburb, town (other cities)		plain text, normally "N", "S", "E", "W", "NE", "SW", "SSE", "WNW" etc., or "north", "south" (lower case, per MOS:COMPASS) etc.
location#	See Notes below	city, suburb, town	maps, Google earth	plain text, may be wikilinked, automatically links the name
lga	local government area	city, suburb, town	Name of the local government area NSW Geographical Names Board (NSW only)	plain text, may be wikilinked, automatically links the name
lga2-lga5	2nd–5th LGAs	city, suburb, town	If more than 5 LGAs are required, use {{plainlist}} as necessary. See Hunter Region for an example.	plain text, link
seat	LGA seat	lga		plain text, link
region	Name of region location is in	city, suburb, town, lga, cadastral, protected		plain text, link
county	lands administrative division (not in all areas)	city, suburb, town, lga	Lands administrative divisions of Australia NSW Geographical Names Board (NSW only)	plain text, link
parish	NSW, Qld, Vic only	city, suburb, town	Lands administrative divisions of Australia NSW Geographical Names Board (NSW only)	plain text
hundred	lands administrative division (not in all areas)	cadastral		plain text, link
former_hundred	lands administrative division (not in all areas)	cadastral		plain text, link
division	lands administrative division (NSW only)	cadastral	Lands administrative divisions of New South Wales	plain text, link
stategov	state government electorates	city, suburb, town, lga, region		plain text, link
stategov2-stategov5	2nd–5th state government electorates	city, suburb, town, lga, region		plain text, link
fedgov	federal government electorates	city, suburb, town, lga, region		plain text, link
fedgov2-fedgov4	2nd–4th federal government electorates	city, suburb, town, lga, region		plain text, link
logo	Logo of LGA	lga	Individual LGA website	image link
logo_upright	width of LGA logo	lga	upright=0.8, which is approximately 176px if the default thumbnail size has not been changed at Special:Preferences) See help below for guidance on determining the value to be used.	number
visitation_num	number of visitors	protected	The number of visitors in a recent year if known.	unformatted number, will be formatted automatically
visitation_year	year of visitation_num	protected	The year during which the number of visitors was counted	raw year plain text, do not wikilink
visitation_footnotes	reference(s) for visitation figure and year	protected		wikitext (can contain links) Best when used with <ref> </ref> tags and {{cite web}}
managing_authorities	authority that manages the area	protected	Name of the authority or organisation that manages the area.	wikitext (can contain links). If an unpiped link is to be used, wikilinking may be excluded as an existing article will be wikilinked automatically.
url	website address	lga, protected	Individual website for the LGA or protected area (Do not use for former LGAs)	bare url. e.g. http://www.example.com
maxtemp	max average annual temperature	suburb, town	Bureau of Meteorology	number (°C)
maxtemp_footnotes	footnote for references	suburb, town	Bureau of Meteorology	wikitext (can contain links) Best when used with <ref> </ref> tags and {{cite web}}
mintemp	min average annual temperature	suburb, town	Bureau of Meteorology	number (°C)
mintemp_footnotes	footnote for references	suburb, town	Bureau of Meteorology	wikitext (can contain links) Best when used with <ref> </ref> tags and {{cite web}}
rainfall	average annual rainfall	suburb, town	Bureau of Meteorology	unformatted number (mm)
rainfall_footnotes	footnote for references	suburb, town	Bureau of Meteorology	wikitext (can contain links) Best when used with <ref> </ref> tags and {{cite web}}
near-n/ne/e/se/s/sw/w/nw	neighbours (suburb, lga)	suburb, lga	Only places that share borders with the subject place should be included in these fields.	plain text, link
near	Central to neighbours	suburb, lga	replaces name (best used without any near-* e.g. to specify a #link to the main text for further info)	plain text, link
footnotes	general footnotes		Additional footnotes for fields that do not have their own field for footnotes	wikitext (can contain links) Best when used with <ref> </ref> tags.
_noautocat	auto categorisation		In a very limited number of cases, the automatic categorisation built into this template may cause anomalies. In such cases, this parameter may be used to prevent automatic categorisation. However, it should only be used when absolutely necessary. When it is used, a hidden note should be included to explain why the parameter is being used in the article.	"yes" to not categorise, or leave blank to categorise

Notes

Type

The infobox type affects the colour of the top bar of the infobox.

Colour	|type=
Light Goldenrod Yellow	city
Antique White	suburb
Snow Flurry (greenish)	town
Lavender	lga
Mauve	region
Light Yellow	cadastral
No colour	protected
No colour	"other"
Very Light Grey	Undefined

IUCN categories for protected areas

Depending on the value of the iucn_category parameter, one of the following banners will be displayed below the name. Valid values are Ia, Ib, II, III, IV, V and VI. For more information read the IUCN protected area categories article. If you cannot find the correct code in a reliable source, leave blank.

IUCN category Ia (strict nature reserve)

IUCN category Ib (wilderness area)

IUCN category II (national park)

IUCN category III (natural monument or feature)

IUCN category IV (habitat/species management area)

IUCN category V (protected landscape/seascape)

IUCN category VI (protected area with sustainable use of natural resources)

Calculating "image_upright"

The image_upright parameter, and image2_upright and logo_upright where applicable, is/are provided so as to facilitate the use of scalable images in this infobox, in accordance with the instructions at WP:IMAGESIZE, which advises against the use of "px" (for example: thumb|300px), as this forces a fixed image width.

Scalable images respect the user's base preference, which may have been selected for that user's particular devices. Module:InfoboxImage, which is used in this infobox, accommodates the use of scaling. However, setting the appropriate scale is slightly more complex than setting a raw "px" value. This guide provides a quick conversion table to make the process of setting a scale easier. It is based on a default thumbnail setting of 220px.

• 170px → upright=0.75
• 180px → upright=0.8
• 190px → upright=0.85
• 200px → upright=0.9
• 210px → upright=0.95
• 220px → upright=1
• 230px → upright=1.05
• 240px → upright=1.1
• 250px → upright=1.15
• 260px → upright=1.2
• 270px → upright=1.23
• 280px → upright=1.25
• 290px → upright=1.3
• 300px → upright=1.35

Footnotes fields

Any references should be placed within the respective "_footnotes" field and not within the field reserved solely for a numeric value. For example, place the reference used for the area of City X in the parameter {{{area_footnotes}}} and not in the {{{area}}} parameter. Otherwise, an error may result.

Unformatted numbers and expression errors

Certain fields require numeric values to be entered in an unformatted/raw fashion—i.e. 1000.0 not 1,000.0. If an expression error is present, simply remove any commas or spaces from the number.

Dist#, Dir# and Location#

This is the distance and approximate direction from another location. The '#' is replaced with a number between 1 and 5. Therefore, distances for up to five locations can be listed using the range 'dist1' – 'dist5'. Direction from the locations can be specified using 'dir1' – 'dir5' and the locations can be listed as 'location1' – 'location5'. Each dist# must be partnered with an appropriate location#. Dir# is optional.

Where to find information

• WikiProject Australian places – Useful resources
• Australian Bureau of Statistics
• LGA links for each state
• Bureau of Meteorology

Tracking categories

Deprecated fields

• Category:Australian place articles using missing parameters (0) – articles that include deprecated fields are automatically added. As of 5 April 2016, the tracked parameters are imagesize, image2size, imagesize2, image_alt2, logosize and official_site.

Errors

• Category:Australian place articles using missing parameters (0) – articles that contain general errors are automatically added.
• Category:Australian place articles with no population year (0) – articles missing the pop_year or pop2_year fields are automatically added.
• Category:Australian place articles with no population footnotes (0) – Articles missing the pop_footnotes or pop2_footnotes fields are automatically added.
• Category:Australian place articles with density errors (0)
• Category:Pages using infobox Australian place with unknown parameters (0) – Articles that include parameters that are not included in the infobox. This category may include articles with incorrectly spelled, but valid parameters.

Temporary

• Category:Pages using infobox Australian place with non-lga type and suppressed location map (0)
• Category:Pages using infobox Australian place with lga type and location map (0)
• Category:Pages using infobox Australian place with an implicitly-suppressed location map (0)
• Category:Pages using infobox Australian place with an explicitly-suppressed location map (0)

Subpages

Template:Infobox Australian place

Template:Infobox Australian place/Blank

Template:Infobox Australian place/Examples

Template:Infobox Australian place/doc

Template:Infobox Australian place/sandbox

Template:Infobox Australian place/sandbox/doc

Template:Infobox Australian place/testcases

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

• adr
• agent
• category
• county-name
• extended-address
• fn
• label
• locality
• nickname
• note
• org
• region
• street-address
• uid
• url
• vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

• geo
• latitude
• longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.

TemplateData

TemplateData documentation used by VisualEditor and other tools

See a monthly parameter usage report for Template:Infobox Australian place in articles based on its TemplateData. TemplateData for Infobox Australian place Display information about a place in Australia in a standard infobox format. Template parameters Parameter Description Type Status Type type The type of place, which determines the look of the infobox. Can be empty or one of the following: 'city', 'suburb', 'town', 'lga', 'region', or 'cadastral'. Suggested values city suburb town lga region cadastral protected other String optional Name name The name of the place. If this parameter is left empty, the infobox title will be blank, while if this parameter is not called at all, it defaults to the name of the article. String optional City city The name of the city the place is located in, which is automatically wikilinked. String optional State Abbreviation state The abbreviation for the state the place in located in, which can be uppercase or lowercase. Suggested values sa vic nsw qld nt wa tas act jbt ni au String optional Image image A filename for a generic image of the locality. String optional Image Width image_upright Override the default width of the image, scalable. Number optional Caption caption A caption for the image. String optional Image Alt Text image_alt Alt text for the image. String optional Image 2 image2 A filename for a second image of the locality. Usually used for maps, especially in LGA articles. String optional Image 2 Width image2_upright Override the default width of the second image, scalable. Number optional Image 2 Caption caption2 A caption for the second image. String optional Image 2 Alt Text image2_alt Alt text for the second image. String optional Coordinates coordinates Coordinates of the locality. Use {{coord}} with 'display=inlines,title'. Please don't be overly precise. String optional Alternative Location Map alternative_location_map Forces the locator map to use this alternative map instead of the default state map. String optional Force National Map force_national_map Set to 'yes' or leave this parameter blank to force the locator map to use the Australian map instead of the default state map. String optional Force LGA Map use_lga_map Set to 'yes' or leave this parameter blank to force the locator map to use the LGA map instead of the default state one. String optional Relief Map relief Set to 'yes' or leave this parameter blank to make the locator map use a relief map. String optional Pushpin Map Caption pushpin_map_caption The caption for the locator map's pushpin. Defaults to the place name. String optional Pushpin Label Position pushpin_label_position Where the caption should appear relative to the locator map's pushpin. Can be one of the following: 'left', 'right', 'top', or 'bottom'. Default right String optional Locator Map Alt Text map_alt Alt text for the locator map. String optional Population pop The total population of the place. Number optional Population Year pop_year The year in which the population measurement was taken. {{CensusAU}} may be used. Number optional Population Footnotes pop_footnotes Footnotes for the population figure. Please use references here. String optional Population 2 pop2 A second total population measurement. Number optional Population 2 Year pop2_year The year in which the second population measurement was taken. {{CensusAU}} may be used. Number optional Population 2 Footnotes pop2_footnotes Footnotes for the second population figure. Please use references here. String optional Population Rank poprank Only for cities. The total population rank of the city. Number optional Population Density density The population density of the place. Number optional Population Density Footnotes density_footnotes Footnotes for the population density figure. Please use references here. String optional Established established est The date the place was established. String optional Abolished abolished The date the place was abolished. String optional Gazetted gazetted The date the place was gazetted. String optional Postcode postcode The postcode of the place. Number optional Elevation elevation Elevation of the place above sea level in metres. Number optional Elevation Footnotes elevation_footnotes Footnotes for the elevation figure. String optional Area area Area of the place in square kilometres. Number optional Area Footnotes area_footnotes Footnotes for the area figure. String optional Time Zone timezone The time zone the place is located in. String optional UTC Time utc The difference between UTC time and the time zone the place resides in, in the format '+' followed by a number. String optional Summer Time Zone (DST) timezone-dst The summer time zone the place is located in. String optional Summer UTC Time (DST) utc-dst The difference between UTC time and the time zone the place resides in in the summer, in the format '+' followed by a number. String optional Mayor mayor LGA only. The name of the mayor of the LGA. String optional Mayor Title mayortitle LGA only. The title of the mayor of the LGA. Defaults to 'Mayor'. String optional Distance 1 dist1 The distance by road in kilometres from location 1 to the place. Number optional Direction 1 dir1 The compass direction from location 1 to the place. Examples are 'NW', 'E', and 'SSE'. String optional Location 1 location1 Another location to compare with this one. String optional Distance 2 dist2 The distance by road in kilometres from location 2 to the place. Number optional Direction 2 dir2 The compass direction from location 2 to the place. Examples are 'NW', 'E', and 'SSE'. String optional Location 2 location2 Another location to compare with this one. String optional Distance 3 dist3 The distance by road in kilometres from location 3 to the place. Number optional Direction 3 dir3 The compass direction from location 3 to the place. Examples are 'NW', 'E', and 'SSE'. String optional Location 3 location3 Another location to compare with this one. String optional Distance 4 dist4 The distance by road in kilometres from location 4 to the place. Number optional Direction 4 dir4 The compass direction from location 4 to the place. Examples are 'NW', 'E', and 'SSE'. String optional Location 4 location4 Another location to compare with this one. String optional Distance 5 dist5 The distance by road in kilometres from location 5 to the place. Number optional Direction 5 dir5 The compass direction from location 5 to the place. Examples are 'NW', 'E', and 'SSE'. String optional Location 5 location5 Another location to compare with this one. String optional Local Government Area (LGA) lga The name of the local government area of the place. String optional Local Government Area (LGA) 2 lga2 Another local government area of the place. String optional Local Government Area (LGA) 3 lga3 Another local government area of the place. String optional Local Government Area (LGA) 4 lga4 Another local government area of the place. String optional Local Government Area (LGA) 5 lga5 Another local government area of the place. String optional Local Government Area (LGA) Seat seat The local government area's seat of government. String optional Region region The region the LGA is in. String optional County county The county the place is in. String optional Parish parish The parish the place is in. String optional Hundred hundred The hundred the place is in. String optional Former Hundred former_hundred The former hundred the place is in. String optional Division division The division the place is in. String optional Local Government localgov The local government electorate of the place. String optional State Government stategov The state government electorate of the place. String optional State Government 2 stategov2 Another state government electorate of the place. String optional State Government 3 stategov3 Another state government electorate of the place. String optional State Government 4 stategov4 Another state government electorate of the place. String optional State Government 5 stategov5 Another state government electorate of the place. String optional Federal Government fedgov The federal government electorate of the place. String optional Federal Government 2 fedgov2 Another federal government electorate of the place. String optional Federal Government 3 fedgov3 Another federal government electorate of the place. String optional Federal Government 4 fedgov4 Another federal government electorate of the place. String optional LGA Logo logo A filename for the logo, if any, of the place's LGA. String optional LGA Logo Size logosize Override the default width of the LGA logo, which is 175px. Number optional LGA URL url The bare URL for the place's LGA's website. String optional Maximum Temperature maxtemp The maximum average annual temperature of the place in degrees Celsius. Number optional Maximum Temperature Footnotes maxtemp_footnotes Footnotes for the maximum temperature figure. Please use references here. String optional Minimum Temperature mintemp The minimum average annual temperature of the place in degrees Celsius. Number optional Minimum Temperature Footnotes mintemp_footnotes Footnotes for the minimum temperature figure. Please use references here. String optional Rainfall rainfall The average annual rainfall of the place in millimetres. Number optional Rainfall Footnotes rainfall_footnotes Footnotes for the rainfall figure. String optional Central Near Grid near Replace the default text in the center of the 'Near' grid (the name of the place). String optional North Near Grid near-n The nearest neighbour of the place to the north. String optional Northeast Near Grid near-ne The nearest neighbour of the place to the northeast. String optional East Near Grid near-e The nearest neighbour of the place to the east. String optional Southeast Near Grid near-se The nearest neighbour of the place to the southeast. String optional South Near Grid near-s The nearest neighbour of the place to the south. String optional Southwest Near Grid near-sw The nearest neighbour of the place to the southwest. String optional West Near Grid near-w The nearest neighbour of the place to the west. String optional Northwest Near Grid near-nw The nearest neighbour of the place to the northwest. String optional