Template:Infobox automobile/doc

From IxWiki
Jump to navigation Jump to search

This template is used in articles about motor vehicles including, but not necessarily limited to, cars, buses and trucks.

Usage

  • See the Parameters section of this document for detailed explanations of what data to enter in each parameter's field.
  • When entering more than one data point per field, use the unbulleted list template {{ubl | fact one | fact two | et cetera }} to put each entry on a separate line. Do not use <br /> to create line breaks in the infobox.
  • In the infobox templates below, conversion templates have been provided for your convenience. After copying the infobox template into the article, enter the data, replacing "NNNN" with numeric entries. When entering data into the conversion template, enter digits without thousands separators; i.e. 4287 not 4,287.

American English

American English
Vehicles designed and marketed using Imperial measurements
American English
Vehicles designed and marketed using metric measurements
{{Infobox automobile
| name =
| image =
| caption =
| manufacturer =
| model_code =
| aka =
| production =
| model_years =
| assembly =
| designer =
| class =
| body_style =
| layout =
| platform =
| related =
| engine = {{cvt|NNN|cuin|L|0|order=flip}}
| transmission =
| propulsion =
| wheelbase = {{cvt|NNN|in|mm|0|order=flip}}
| length = {{cvt|NNN|in|mm|0|order=flip}}
| width = {{cvt|NNN|in|mm|0|order=flip}}
| height = {{cvt|NNN|in|mm|0|order=flip}}
| weight = {{cvt|NNN|-|NNNN|lb|kg|0|order=flip}}
| predecessor =
| successor =
| sp = us
}}
{{Infobox automobile
| name =
| image =
| caption =
| manufacturer =
| model_code =
| aka =
| production =
| model_years =
| assembly =
| designer =
| class =
| body_style =
| layout =
| platform =
| related =
| engine =
| transmission =
| propulsion =
| wheelbase = {{cvt|NNNN|mm|in|1}}
| length = {{cvt|NNNN|mm|in|1}}
| width = {{cvt|NNNN|mm|in|1}}
| height = {{cvt|NNNN|mm|in|1}}
| weight = {{cvt|NNN|-|NNNN|kg|lb|0}}
| predecessor =
| successor =
| sp = us
}}

British English

British English
Vehicles designed and marketed using metric measurements
British English
Vehicles designed and marketed using Imperial measurements
{{Infobox automobile
| name =
| image =
| caption =
| manufacturer =
| model_code =
| aka =
| production =
| model_years =
| assembly =
| designer =
| class =
| body_style =
| layout =
| platform =
| related =
| engine =
| transmission =
| propulsion =
| wheelbase = {{cvt|NNNN|mm|in|1}}
| length = {{cvt|NNNN|mm|in|1}}
| width = {{cvt|NNNN|mm|in|1}}
| height = {{cvt|NNNN|mm|in|1}}
| weight = {{cvt|NNNN|-|NNNN|kg|lb|0}}
| predecessor =
| successor =
| sp = uk
}}
{{Infobox automobile
| name =
| image =
| caption =
| manufacturer =
| model_code =
| aka =
| production =
| model_years =
| assembly =
| designer =
| class =
| body_style =
| layout =
| platform =
| related =
| engine = {{cvt|NNNN|cuin|0|order=flip}}
| transmission =
| propulsion =
| wheelbase = {{cvt|NNNN|in|mm|1|order=flip}}
| length = {{cvt|NNNN|in|mm|1|order=flip}}
| width = {{cvt|NNNN|in|mm|1|order=flip}}
| height = {{cvt|NNNN|in|mm|1|order=flip}}
| weight = {{cvt|NNNN|-|NNNN|lb|kg|0|order=flip}}
| predecessor =
| successor =
| sp = uk
}}

Electric and hybrid vehicles

| motor =
| drivetrain =
| battery =
| range =
| electric_range =
| charging =

Infobox parameters

Toyota XYZ
2007 Toyota XYZ sedan
Overview
ManufacturerToyota
Model codeXV40
Also calledToyota ZYX
ProductionAugust 2006 – May 2011
Model years2007–2011
Assembly
DesignerJohn Smith
Body and chassis
ClassMid-size
Body style
Layout
PlatformToyota XYZ platform
RelatedToyota 321
Powertrain
Engine
  • 1.8 L Delta I4 (gasoline)
  • 1.8 L Delta I4 (gasoline hybrid)
  • 2.0 L Delta I4-S (gasoline)
  • 3.0 L Zeta V6-T (diesel)
Transmission
  • 5-speed Alpha manual
  • 6-speed Beta automatic
  • CVT Gamma automatic
Dimensions
Wheelbase2,766 mm (108.9 in)
Length
  • 4,643 mm (182.8 in) (sedan)
  • 4,668 mm (183.8 in) (wagon)
Width1,806 mm (71.1 in)
Height
  • 1,410–1,425 mm (55.5–56.1 in) (sedan)
  • 1,427 mm (56.2 in) (wagon)
Curb weight
  • 1,628–1,703 kg (3,589–3,754 lb) (sedan)
  • 1,711–1,768 kg (3,772–3,898 lb) (wagon)
Chronology
PredecessorToyota ABC
SuccessorToyota 123
{{Infobox automobile
| name = Toyota XYZ
| image = 2007 Toyota Aurion Prodigy 06 (edit 5).jpg
| caption = 2007 Toyota XYZ sedan
| manufacturer = [[Toyota]]
| model_code = XV40
| aka = Toyota ZYX
| production = August 2006 – May 2011
| model_years = 2007–2011
| assembly = {{ubl
  | Australia: [[Altona, Victoria]] ([[Toyota Australia|TMCA]])
  | Canada: [[Cambridge, Ontario]] ([[Toyota Motor Manufacturing Canada|TMMC]])
  | United States: [[Fremont, California]] ([[NUMMI]])
  }}
| designer = John Smith
| class = [[Mid-size car|Mid-size]]
| body_style = {{ubl
  | 4-door [[sedan (automobile)|sedan]]
  | 5-door [[station wagon]]
  }}
| layout = {{ubl
  | [[Front-engine, front-wheel-drive layout|Transverse front-engine, front-wheel drive]]
  | [[Front-engine, all-wheel-drive layout|Longitudinal front-engine, all-wheel drive]]
  }}
| platform = Toyota XYZ platform
| related = Toyota 321
| engine = {{ubl
  | 1.8{{nbsp}}L ''Delta'' [[inline-four engine|I4]] (gasoline)
  | 1.8{{nbsp}}L ''Delta'' [[inline-four engine|I4]] (gasoline [[hybrid electric vehicle|hybrid]])
  | 2.0{{nbsp}}L ''Delta'' [[inline-four engine|I4]]-[[supercharger|S]] (gasoline)
  | 3.0{{nbsp}}L ''Zeta'' [[V6 engine|V6]]-[[turbocharger|T]] (diesel)
  }}
| transmission = {{ubl
  | 5-speed ''Alpha'' manual
  | 6-speed ''Beta'' automatic
  | [[continuously variable transmission|CVT]] ''Gamma'' automatic
  }}
| wheelbase = {{cvt|2766|mm|in|1}}
| length = {{ubl
  | {{cvt|4643|mm|in|1}} (sedan)
  | {{cvt|4668|mm|in|1}} (wagon)
  }}
| width = {{cvt|1806|mm|in|1}}
| height = {{ubl
  | {{cvt|1410|-|1425|mm|in|1}} (sedan)
  | {{cvt|1427|mm|in|1}} (wagon)
  }}
| weight = {{ubl
  | {{cvt|1628|-|1703|kg|lb|0}} (sedan)
  | {{cvt|1711|-|1768|kg|lb|0}} (wagon)
  }}
| predecessor = Toyota ABC
| successor = Toyota 123
| sp = us
}}

Name

The name field states the brand and model name or brand and model series used in the original or primary market of the subject vehicle. The name appears at the top of the infobox outside the border. Generally, the data entered in this field will match the title of the article.
Examples:
| name = Cadillac ATS
| name = Honda Civic (first generation)
| name = BMW 3 Series (E90)

Image

The image field displays an image of the subject vehicle to display in the infobox. The image used in the Infobox must comply with the standards outlined in the images section of WikiProject Automobiles/Conventions. Use an image showing the front three-quarter view (the vehicle parked at an angle relative to the photographer so that the photo shows the front and side of the vehicle) preferably taken against a non-distracting background with appropriate lighting. Enter the image file name and file type extension only.
Examples:
| image = Cadillac ATS 2013.jpg
| image = civicgen1.jpg
| image = 2007 BMW E90 at LA Auto Show.jpg

Caption

The caption field describes the vehicle pictured in the image field above.
Examples:
| caption = 2013 Cadillac ATS
| caption = 1974 Honda Civic 5-door hatchback
| caption = 2007 BMW 328xi coupé

Type

Vehicle type (e.g. Omnibus, truck, etc.)

Manufacturer

The manufacturer field states the company, division, or subsidiary responsible for the vehicle's engineering and development, which is not necessarily the entity assembling or marketing the vehicle. Do not use this field to list assembly locations, assembly facility names or assembly company names; that data must be entered in the separate assembly field.
Examples:
| manufacturer = [[Cadillac]]
| manufacturer = [[Honda]]
| manufacturer = [[BMW]]
You may show the parent company of a given manufacturer in parentheses after the manufacturer entry, if applicable.
| manufacturer = [[Cadillac]] ([[General Motors]])
| manufacturer = [[Lexus]] ([[Toyota]])
| manufacturer = [[Škoda]] ([[Volkswagen Group|Volkswagen]])

Model code

The model code field states the code designated by the manufacturer to the vehicle, usually listed at the vehicle's vehicle identification plate, owner's manual book or parts catalogue. A single model may have multiple model codes to determine different engine, transmission and body style combinations. Avoid using this field to state the platform code shared with another model.
Examples:
| model_code = XV40
| model_code = KF
Use the unbulleted list template to display multiple entries:
| model_code = {{ubl | FB1 | FB2 | FB3 | FB4 | FB5 | FB6 | FB | FG2 | FG3}}
| model_code = {{ubl | SP2 (South Korea) | SP2i (India) | SP2c (China)}}
| model_code = {{ubl | E90 (saloon) | E91 (estate) | E92 (coupé) | E93 (convertible)}}

AKA

The AKA (also known as) field lists vehicles that are essentially the same as the subject vehicle, but are sold in other countries under a different brand and/or model name. Vehicles listed in this field generally do not have their own dedicated article. Not to be confused with the related field as described in the notes section below.
Examples:
In the Ford Escape article:
| aka = [[Ford Kuga]]
Use the unbulleted list template to display multiple entries:
In the Buick Regal article:
| aka = {{ubl | Chevrolet Vectra | [[Opel Insignia]] | Vauxhall Insignia}}

Production

The production field states the date production started and the date production ended. Dates should be expressed in years (for example, 2001–2006) or in months and years (for example, April 2001 – November 2006). Full dates should not be used in the production field of the infobox (for example, 7 April 2001 – 16 November 2006); full dates can be stated in the body of the article.
If production started in any year prior to the current year and is still ongoing, 2008–present, et cetera, is the preferred style. However, 2024– is preferable to 2024–present while we are still in 2024.
Production end dates should never be in the future (for example, 2001–2026), even if there are reliable sources. The end date should remain "present" until production has ended.
Vehicles that have not yet entered production should state, 2026 (to commence).
For vehicles sold in North America where the use of model years is widespread, the model_years field of the infobox may be used in addition to production. See model years in this document for more information.
Examples:
| production = 2004–2011
| production = December 2004 – October 2011
| production = 2009–present
| production = 2024–
| production = 2026 (to commence)

Model years

The model year field specifies the model year designations under which the manufacturer marketed the subject vehicle. This designation is determined by the manufacturer using criteria unique to that manufacturer and may or may not correspond with the calendar year. Do not use months or half years.
2024– is preferable to 2024–present while we are still in 2024.
If the first model year is any year prior to the current year and sales of the model are ongoing, 2006–present, et cetera, is the preferred style.
Examples:
| model_years = 2024–
| model_years = 2010–present
| model_years = 1974–1979

Assembly

The assembly field states the country of manufacture first, followed by a colon, and then the exact location, such as the city or town followed by the state or province, if applicable. If the manufacturing or assembly facility has an official name, is a legally incorporated subsidiary, is a partnership, is a joint venture or is an independent third party contractor, list that information in parentheses after the location. If the vehicle is assembled in several locations in the same country, seperate enties with a semicolon.
Examples:
| assembly = Japan: [[Suzuka, Mie]]
| assembly = United States: [[Lansing, Michigan]] ([[Lansing Grand River Assembly]])
| assembly = United States: [[North Tarrytown, New York]] ([[North Tarrytown Assembly]]); [[Ypsilanti, Michigan]] ([[Willow Run Assembly]])
Use the unbulleted list template to display multiple entries:
| assembly = {{ubl | Germany: [[Rüsselsheim]] | Finland: [[Uusikaupunki]] ([[Valmet Automotive]]) | Canada: [[Cambridge, Ontario]] ([[Toyota Motor Manufacturing Canada|TMMC]])}}

Designer

The designer field is used to record the name(s) of the vehicle's exterior designer(s).

Class

The class field states the class segment to which the subject vehicle belongs. See also the classification guidelines of WikiProject Automobiles/Conventions.
Example:
| class = [[Mid-size car|Mid-size]]

Body style

The body style field lists the different available body styles of the article subject. State the number of doors as a numeral and the body style. Note: station wagons, hatchbacks, etc, are given an extra door to signify their larger rear openings compared to coupés and sedans, etc.
Examples:
| body_style = 4-door [[sedan (automobile)|sedan]]
| body_style = {{ubl | 2-door [[pickup truck|pickup]] | 2-door [[coupé]] | 3-door [[hatchback]] | 4-door [[sedan (automobile)|sedan]] | 5-door [[station wagon]] }}

Layout

The layout field states subject vehicle's drivetrain / powertrain configuration. That is; whether the engine is mounted transversely or longitudinally, and then if it is mounted at the front, middle, or rear of the vehicle. Furthermore, the drive wheels need to be denoted; that is, front-, rear-, or four-wheel drive.
Examples:
| layout = [[Front-engine, front-wheel-drive layout|Transverse front-engine, front-wheel drive]]
| layout = {{ubl | ([[Front-engine, rear-wheel drive layout|Longitudinal front-engine, rear-wheel drive]]) | ([[Front-engine, four-wheel drive layout|Longitudinal front-engine, four-wheel drive]])}}

Platform

The platform field states the name of the platform, architecture or module upon which the subject vehicle is built. If the subject vehicle is not based on a platform, architecture or module, or if the manufacturer has not disclosed this information, leave this field blank.
The related field lists similar vehicles that share considerable componentry with the subject vehicle. Do not list vehicles that merely share the same platform. Not to be confused with the aka field as described in the notes section below.

Engines

The engine field lists an engine's displacement, the engine name/code in italics, the cylinder arrangement and cylinder count, and then in parentheses, the type of forced induction (if applicable) and fuel type. Engine outputs and other data should be excluded. For fuel type, the terms "gasoline" (American English) or "petrol" (British English) should be used depending upon the spelling convention of the article.
The displacement should be written in liters (L) or cubic centimeters (cc) unless the engine was originally engineered, designated, and marketed in cubic inches (see below).
Examples in liters (L):
| engine = 0.8&nbsp;L ''Alpha'' [[straight-three engine|I3]] (gasoline)
| engine = 1.8&nbsp;L ''Delta'' [[inline-four engine|I4]] (gasoline)
| engine = 1.8&nbsp;L ''Delta'' [[inline-four engine|I4]] (gasoline [[hybrid electric vehicle|hybrid]])
| engine = 2.0&nbsp;L ''Delta'' [[inline-four engine|I4]]-[[supercharger|S]] (gasoline)
| engine = 3.0&nbsp;L ''Zeta'' [[V6 engine|V6]]-[[turbocharger|T]] (diesel)
Use the unbulleted list template to display multiple entries:
| engine = {{ubl | 2.0&nbsp;L ''Delta'' [[inline-four engine|I4]]-[[supercharger|S]] (gasoline) | 3.0&nbsp;L ''Zeta'' [[V6 engine|V6]]-[[turbocharger|T]] (diesel) }}
Cubic centimeters (cc) may be used where appropriate.
Examples in cubic centimeters (cc):
| engine = 789&nbsp;cc ''Alpha'' [[straight-three engine|I3]] (gasoline)
| engine = 1,794&nbsp;cc ''Delta'' [[inline-four engine|I4]] (gasoline)
Cubic inches (cu in) may be used if the engine was originally engineered, designated, and marketed in cubic inches. When working with cubic inches, use the convert template {{convert|NNN|cuin|L|0|abbr=on|order=flip}}. We abbreviate cubic inches using cu in rather than in3 or CID.
Example in cubic inches (cu in):
| engine = {{convert|350|cuin|0|abbr=on|order=flip}} ''Gamma'' [[V8 engine|V8]] (gasoline)
The motor field states the power output and type of electric motor(s) installed in the vehicle
Example:
| motor = Three-phase [[AC induction motor]]

Transmissions

The transmission field states the number of forward-propulsion gears, the transmission name/code in italics, and the transmission type. The number of forward-propulsion gears should be expressed numerically (for example: 5-speed), not alphabetically (for example: five-speed).
Examples:
| transmission = 5-speed ''Alpha'' manual
| transmission = 6-speed ''Beta'' automatic
| transmission = [[continuously variable transmission|CVT]] ''Gamma'' automatic
Use the unbulleted list template to display multiple entries:
|transmission = {{ubl | 6-speed ''[[Transmission Technologies Corporation|Tremec]] M3L TR-3160'' manual | 6-speed ''[[Hydramatic|Hydra-Matic]] 6L45'' automatic}}

Propulsion

For non-wheeled vehicles; e.g. "Track"

Drivetrain

The drivetrain field states what connects engines and motors to drive wheels. For compatibility with Template:Infobox automobile, you may continue to use transmission to describe multi-speed gearboxes (e.g. 6-speed manual).
Example:
| drivetrain = [[Hybrid vehicle drivetrain#Series hybrid|Series hybrid]]
The battery field states both the capacity and chemistry of the propulsion battery used in the vehicle. Do not include information about lead-acid, 12 V batteries ("SLI" or "starting, lighting and ignition" batteries) typically used with internal combustion engines that may be present in a hybrid electric vehicle.
Example:
| battery = 60 or 85{{nbsp}}[[kWh]] [[lithium-ion battery|lithium-ion]]

Range

The range field states the maximum range of the vehicle, combining all available on-board fuel and power sources. State both the range and the applicable certifying body or test regimen, for example, the WLTP, EPA or NEDC
Example:
| range = {{convert|379|mi}}{{nbsp}}[[FTP-75|EPA]]
| range = {{convert|366|mi}}{{nbsp}}[[New European Driving Cycle|NEDC]]
The electric range field states the maximum range of the electric propulsion system, unassisted by any internal combustion engine that may be installed in the vehicle. State both the range and the applicable certifying body or test regimen, for example, the WLTP, EPA or NEDC
Examples:
| range = {{ubl | {{convert|265|mi|abbr=on}}{{nbsp}}[[FTP-75|EPA]] }}
| range = {{ubl | 85{{nbsp}}kWh {{convert|265|mi|abbr=on}}{{nbsp}}[[FTP-75|EPA]], {{convert|300|mi|abbr=on}}{{nbsp}}Tesla Motors, {{convert|310|mi|abbr=on}}{{nbsp}}[[New European Driving Cycle|NEDC]] | 60{{nbsp}}kWh {{convert|208|mi|abbr=on}}{{nbsp}}EPA {{convert|230|mi|abbr=on}}{{nbsp}}Tesla Motors {{convert|233|mi|abbr=on}}{{nbsp}}NEDC }}
The charging field states the type of plug-in connector (e.g. CCS Combo 2, CHAdeMO, SAE J1772, IEC Type 2) and the vehicle's charging system limits (e.g. 50 kW DC)
Examples:
| charging = {{ubl | 11{{nbsp}}kW 85{{ndash}}265{{nbsp}}V onboard charger for 1ϕ 40{{nbsp}}A or 3ϕ 16{{nbsp}}A | Optional "Twin Charger" for 22{{nbsp}}kW for 1ϕ 80{{nbsp}}A or 3ϕ 32{{nbsp}}A | Optional supercharger for 100{{nbsp}}kW DC offboard charging, adapters for domestic AC sockets (120{{ndash}}240{{nbsp}}V) }}

Dimensions and weight

The wheelbase, length, width, height and weight fields are used to state dimensions and weights. Dimensions and weight may be stated as a range, when appropriate. For example, for a particular body style, the base model with the small engine usually weighs the least, while the same body style with a bigger, optional engine usually weighs more. If this is the case, the infobox shows the lowest weight and highest weight for a particular body style as a range. Moreover, different trim levels may be fitted with different bumpers, and this, among other reasons may contribute to different exterior dimensions that should likewise be expressed as a range.
Do list separate data for each body style (coupé, sedan, station wagon, etc), but do not list separate data for each trim or option level. Use the unbulleted list template to display multiple entries:
Examples:
| wheelbase = {{convert|2766|mm|in|1|abbr=on}}
| length = {{convert|4643|mm|in|1|abbr=on}}
| width = {{convert|1806|mm|in|1|abbr=on}}
| height = {{convert|1410|mm|in|1|abbr=on}}
| weight = {{convert|1628|-|1703|kg|lb|0|abbr=on}}
OR
| wheelbase = {{ubl | {{convert|2766|mm|in|1|abbr=on}} (sedan) | {{convert|2766|mm|in|1|abbr=on}} (wagon) }}
| length = {{ubl | {{convert|4643|mm|in|1|abbr=on}} (sedan) | {{convert|4668|mm|in|1|abbr=on}} (wagon) }}
| width = {{ubl | {{convert|1806|mm|in|1|abbr=on}} (sedan) | {{convert|1806|mm|in|1|abbr=on}} (wagon) }}
| height = {{ubl | {{convert|1410|-|1425|mm|in|1|abbr=on}} (sedan) | {{convert|1425|in|1|mm|abbr=on}} (wagon) }}
| weight = {{ubl | {{convert|1628|-|1703|kg|lb|0|abbr=on}} (sedan) | {{convert|1711|-|1768|kg|0|abbr=on}} (wagon) }}

Predecessor

The predecessor field states the manufacturer and model name of the vehicle that the subject vehicle replaced, if applicable. Wikilink the entry as appropriate.

Successor

The successor field states the manufacturer and model name of the vehicle that replaced the subject vehicle, if applicable. Wikilink the entry as appropriate.

Sp

The sp field controls the display spelling of the curb weight / kerb weight parameter in the infobox to match the spelling convention of the article.
Enter us for American English (default); enter uk for British English.

Notes

  • Aka versus related: aka is intended for alternate names such as the name give in other countries markets, where the subject vehicle is offered under a different brand and/or model name. Vehicles listed the AKA field typically do not have their own articles, instead redirecting to the original article. Related is intended for listing similar vehicles that share considerable componentry (but beyond mere platform sharing). Vehicles in the related field usually have their own articles.

Tracking category

Microformat

The HTML mark-up produced by this template includes an hProduct microformat that makes a product's details readily parsable by computer programs. This aids tasks such as the cataloguing of articles and maintenance of databases. For more information about the use of microformats on Wikipedia, please visit the Microformat WikiProject.

If the product has a URL, use {{URL}} to include it.

Classes used

The HTML classes of this microformat include:

  • brand
  • category
  • description
  • fn
  • hproduct
  • identifier
  • listing
  • photo
  • price
  • review
  • type
  • url
  • value
Please do not rename or remove these classes
nor collapse nested elements which use them.

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Infobox automobile in articles based on its TemplateData.

TemplateData for Infobox automobile

This template is used in articles about motor vehicles including, but not necessarily limited to, cars, vans, buses and trucks.

Template parameters

This template prefers block formatting of parameters.

ParameterDescriptionTypeStatus
Namename

The name field states the brand and model name or brand and model series used in the original or primary market of the subject vehicle. The name appears at the top of the infobox outside the border. Generally, the data entered in this field will match the title of the article.

Lineoptional
Imageimage

The image field displays an image of the subject vehicle to display in the infobox. The image used in the Infobox must comply with the standards outlined in the images section of WikiProject Automobiles/Conventions. Use an image showing the front three-quarter view (the vehicle parked at an angle relative to the photographer so that the photo shows the front and side of the vehicle) preferably taken against a non-distracting background with appropriate lighting. Enter the image file name and file type extension only.

Fileoptional
Image sizeimage_size

Image size.

Lineoptional
Alt text for imagealt

Alt text for people who cannot see the image.

Stringoptional
Captioncaption

The caption field describes the vehicle pictured in the Image field above.

Stringoptional
Typetype

Type of vehicle, e.g. omnibus, truck, etc.

Lineoptional
Manufacturermanufacturer

The manufacturer field states the company, division, or subsidiary responsible for the vehicle's engineering and development, which is not necessarily the entity assembling or marketing the vehicle. Do not use this field to list assembly locations, assembly facility names or assembly company names; that data must be entered in the separate Assembly field. You may show the parent company of a given manufacturer in parentheses after the manufacturer entry, if applicable.

Lineoptional
Model codemodel_code

The model code field lists the designations given to the vehicle by its manufacturer, which typically consists of 2–6 characters. Model codes are usually specific to the vehicle. If the manufacturer has not disclosed this information, leave this field blank.

Lineoptional
Also known asaka

The AKA (also known as) field lists vehicles that are essentially the same as the subject vehicle, but are sold in other countries under a different brand and/or model name. Vehicles listed in this field generally do not have their own dedicated article. Not to be confused with the Related field.

Stringoptional
Production dateproduction

The production field states the date production started and the date production ended. Dates should be expressed in years (for example, 2001–2006) or in months and years (for example, April 2001 – November 2006). Full dates should not be used in the production field of the infobox (for example, 7 April 2001 – 16 November 2006); full dates can be stated in the body of the article. If production started in any year prior to the current year and is still ongoing, 2008–present, et cetera, is the preferred style. However, 2013– is preferable to 2013–present while we are still in 2013. Vehicles that have not yet entered production should state, 2015 (to commence).

Lineoptional
Model yearsmodel_years

The model year field specifies the model year designations under which the manufacturer marketed the subject vehicle. This designation is determined by the manufacturer using criteria unique to that manufacturer and may or may not correspond with the calendar year. Do not use months or half years. 2013– is preferable to 2013–present while we are still in 2013. If the first model year is any year prior to the current year and sales of the model are ongoing, 2006–present, et cetera, is the preferred style.

Lineoptional
Assemblyassembly

The assembly field states the country of manufacture first, followed by a colon, and then the exact location, such as the city or town followed by the state or province, if applicable. If the manufacturing or assembly facility has an official name, is a legally incorporated subsidiary, is a partnership, is a joint venture or is an independent third party contractor, list that information in parentheses after the location. Use the unbulleted list template ({{ubl}}) to display multiple entries.

Stringoptional
Factoryfactory

Factory of manufacture.

Lineoptional
Designerdesigner

The designer field is used to record the name(s) of the vehicle's exterior designer(s).

Stringoptional
Classclass

The class field states the class segment to which the subject vehicle belongs. See also the classification guidelines of WikiProject Automobiles/Conventions.

Lineoptional
Body stylebody_style

The body style field lists the different available body styles of the article subject. State the number of doors as a numeral and the body style. Note: station wagons, hatchbacks, etc, are given an extra door to signify their larger rear openings compared to coupés and sedans, etc.

Stringoptional
Platformplatform

The platform field states the name of the platform, architecture or module upon which the subject vehicle is built. If the subject vehicle is not based on a platform, architecture or module, or if the manufacturer has not disclosed this information, leave this field blank.

Lineoptional
Floor typefloortype

Floor type.

Stringoptional
Chassis typechassis

Chassis type.

Stringoptional
Related vehiclesrelated

The related field lists similar vehicles that share considerable componentry with the subject vehicle. Do not list vehicles that merely share the same platform. Not to be confused with the AKA field.

Stringoptional
Layoutlayout

The layout field states subject vehicle's drivetrain / powertrain configuration. That is; whether the engine is mounted transversely or longitudinally, and then if it is mounted at the front, middle, or rear of the vehicle. Furthermore, the drive wheels need to be denoted; that is, front-, rear-, or four-wheel drive.

Stringoptional
Enginesengine

The engine field lists an engine's displacement, the engine name/code in italics, the cylinder arrangement and cylinder count, and then in parentheses, the type of forced induction (if applicable) and fuel type. Engine outputs and other data should be excluded. For fuel type, the terms "gasoline" (American English) or "petrol" (British English) should be used depending upon the spelling convention of the article. The displacement should be written in liters (L) or cubic centimeters (cc) unless the engine was originally engineered, designated, and marketed in cubic inches (see below).

Stringoptional
Motormotor

The motor field states the power output and type of electric motor(s) installed in the vehicle

Lineoptional
Power outputpowerout Power

Power output of the drivetrain.

Lineoptional
Transmissiontransmission

The transmission field states the number of forward-propulsion gears, the transmission name/code in italics, and the transmission type. The number of forward-propulsion gears should be expressed numerically (for example: 5-speed), not alphabetically (for example: five-speed).

Stringoptional
Propulsionpropulsion

For non-wheeled vehicles

Example
Tracks (continuous track)
Stringoptional
Drivetraindrivetrain

The drivetrain field states what connects engines and motors to drive wheels. For compatibility with Template:Infobox automobile, you may continue to use transmission to describe multi-speed gearboxes (e.g. 6-speed manual).

Stringoptional
Batterybattery

The battery field states both the capacity and chemistry of the propulsion battery used in the vehicle. Do not include information about lead-acid, 12V batteries ("SLI" or "starting, lighting and ignition" batteries) typically used with internal combustion engines that may be present in a hybrid electric vehicle.

Stringoptional
Rangerange

The range field states the maximum range of the vehicle, combining all available on-board fuel and power sources. State both the range and the applicable certifying body or test regimen, for example, the EPA or NEDC

Lineoptional
Electric rangeelectric_range

The electric range field states the maximum range of the electric propulsion system (100% electric propulsion), so unassisted by any internal combustion engine that may be installed in the vehicle. State both the range and the applicable certifying body or test regimen, for example, the WLTP, EPA or NEDC

Stringoptional
Chargingcharging

The charging field states the type of plug-in connector (e.g. CCS Combo2, Chademo, SAEJ1772, IEC Type 2) and the vehicle's charging system limits (e.g. 50 kW DC)

Stringoptional
Wheelbasewheelbase

Wheelbase of vehicle; may be stated as a range, when appropriate. Do list separate data for each body style (coupé, sedan, station wagon, etc), but do not list separate data for each trim or option level. Use the unbulleted list template to display multiple entries. Example entry: {{convert|2766|mm|in|1|abbr=on}}

Stringoptional
Lengthlength

Length of vehicle; may be stated as a range, when appropriate. Do list separate data for each body style (coupé, sedan, station wagon, etc), but do not list separate data for each trim or option level. Use the unbulleted list template to display multiple entries. Example entry: {{convert|4643|mm|in|1|abbr=on}}

Stringoptional
Widthwidth

Width of vehicle; may be stated as a range, when appropriate. Do list separate data for each body style (coupé, sedan, station wagon, etc), but do not list separate data for each trim or option level. Use the unbulleted list template to display multiple entries. Example entry: {{convert|1806|mm|in|1|abbr=on}}

Stringoptional
Heightheight

Height of vehicle; may be stated as a range, when appropriate. Do list separate data for each body style (coupé, sedan, station wagon, etc), but do not list separate data for each trim or option level. Use the unbulleted list template to display multiple entries. Example entry: {{convert|1410|mm|in|1|abbr=on}}

Stringoptional
Weightweight

Weight of vehicle; may be stated as a range, when appropriate. Do list separate data for each body style (coupé, sedan, station wagon, etc), but do not list separate data for each trim or option level. Use the unbulleted list template to display multiple entries. Example entry: {{convert|1628|-|1703|kg|lb|0|abbr=on}}

Stringoptional
Display spelling stylesp

The sp field controls the display spelling of the curb weight / kerb weight parameter in the infobox to match the spelling convention of the article. Enter us for American English (default); enter uk for British English.

Default
us
Lineoptional
Predecessorpredecessor

The predecessor field states the manufacturer and model name of the vehicle that the subject vehicle replaced, if applicable. Wikilink the entry as appropriate. Do not include spiritual successors to the infobox.

Stringoptional
Successorsuccessor

The successor field states the manufacturer and model name of the vehicle that replaced the subject vehicle, if applicable. Wikilink the entry as appropriate. Do not add spiritual successors to the infobox.

Stringoptional
Number of doorsdoors

Number of doors.

Stringoptional
Powertrain capacitycapacity

Powertrain capacity.

Lineoptional