Template:Infobox mill building/doc
This is a documentation subpage for Template:Infobox mill building. It may contain usage information, categories and other content that is not part of the original template page. |
This template uses Lua: |
{{Infobox mill building}} may be used to summarize information about a building. It can be used in two ways with named parameters or with ten unnamed parameters.
Usage
{{Infobox mill building | name = | building_name = | native_building_name = | alternate_names = | image = | caption = | textile_type = | mill-process = | building_type = | architectural_style = | structural_system = | cost = | employees = <!-- For titles and maps-- geo info--> | location = | altitude = | map_type = | serving_canal = | serving_railway = | serving_river = | owner = | owner_2 = | acquisition_date_2 = | owner_3 = | acquisition_date_3 = | owner_4 = | acquisition_date_4 = | current_tenants = | current_owner = | coordinates = <!-- {{coord}} --> | oscoor = | start_date = | completion_date = | renovation_date = | re-equipment_date_2 = | re-equipment_date_3 = | current_status = | demolition_date = | destruction_date = <!-- Dimensions--> | height = | other_dimensions = | floor_count = | floor_area = | floor_height = | floor_usage = <!-- The building team --> | main_contractor = | architect = | architecture_firm = | structural_engineer = | other_designers = | awards = | ren_architect = | ren_firm = | ren_oth_designers = | ren_qty_surveyor = | ren_awards = <!-- Steam powered--> | engine_date = | engine_decommissioned = | engine_maker = | engine_type = | engine_valve = | engine_throw = | engine_rpm = | engine_kWatt = | engine_ihp = | engine_fly_diameter = | transmission_type = | no_of_ropes = | boilers = | boiler_temperature = | psi = <!-- Watermills --> | wheels = | diameter_of_water_wheel = | width_of_wheel = | wheel_rpm = <!-- Equipment--> | equipment_maker = | date_of_equipping = | no_of_looms = | cotton_count = | scutchers = | carding_engines = | doublers = | kiers = | other_equipment = | mule_frames = | ring_frames = <!-- References--> | embedded = | references = }}
Parameters
Unnamed parameters
- Mill name
- Location
- Coordinate
- Reference
- Notes- Description (not yet displayed)
- Image
- Architect/Owner (some lists use different info (not yet displayed)
- Built
- Decommissioned
- Demolished
The purpose of this is to allow lists of mills to be constructed using the {{TMbegin}}, {{TMtr}}, {{TMend}} sequence. The {{TMtr}} can be copied directly across into a new article and renamed {{Infobox mill building}} as the unnamed parameters transfer directly across. The new Infobox can then be edited, and as new data is input it will over-ride potentially conflicting parameters. Similarly, any {{Infobox mill building}} named-parameters can safely be added to a {{TMtr}} call, as they will be safely ignored while on the list page- but will then be valid here if a copy is made.
The named parameters are seen in the section below.
Example
Cotton | |
---|---|
Spindles | 60000 |
Spinning (ring mill) | |
Architectural style | Standing, usage changed |
Structural system | Red engineering brick |
Location | Failsworth, Oldham |
Serving canal | Rochdale Canal |
Serving railway | Oldham Loop Line |
Further ownership |
|
Coordinates | SD789345 Lua error: callParserFunction: function "#coordinates" was not found. |
Construction | |
Built | 1906 |
Demolished | Chimney 1964 |
Floor count | 4 |
Floor area | 345 by 130 feet (105 by 40 m) |
Floor usage | In 1950:
|
Other dimensions | Chimney 210 feet (64 m) |
Design team | |
Architect | George Stott |
Power | |
Date | 1906 |
Engine maker | Buckley and Taylor of Oldham |
Decommissioned | 1958 |
Engine type | marine type vertical triple expansion engine |
Cylinder diameter and throw | 63-inch diameter low-pressure cylinder |
rpm | 64 |
Installed horse power (ihp) | 1800 ihp sometimes loaded to 2000 ihp |
Flywheel diameter | 26 feet (7.9 m) |
Transmission type | rope |
No. of ropes | 26 ropes |
Boiler configuration | |
Boilers | ? Dual Lancashire ? |
Mule Frames | 60000 |
References | |
Lua error: bad argument #1 to "get" (not a valid title). |
{{Infobox mill building | building_name = Regent Mill | native_building_name= | alternate_names = | image = Mill-image-pending.jpg | caption = Regent Mill in 1950 | textile_type = [[Cotton]] | building_type = [[Cotton-spinning machinery|Spinning (ring mill)]] | architectural_style = | structural_system = Red engineering brick | cost = | location = [[Failsworth]], Oldham | serving_canal = [[Rochdale Canal]] | serving_railway = [[Oldham Loop Line]] | owner = | owner_2 = LCC | acquisition_date_2 = 1930 | owner_3 = Salton | acquisition_date_3 = | owner_4 = | acquisition_date_4 = | current_tenants = | coordinates = {{coord|53.5087|-2.1604|display=inline|region:GB|format=dms}} | oscoor = SD 789345 | altitude = | start_date = 1906 | completion_date = | renovation_date = | demolition_date = Chimney 1964 | current_status = Standing, usage changed | height = | other_dimensions = Chimney {{convert|210|ft|m}} | floor_count = 4 | floor_area = {{convert|345|by|130|ft|m}} | floor_height = | floor_usage = In 1950: *cellar: a warehouse, yarn cellar, waste room, cotton room, and dust room. *The first floor was the card room, *The second floor was the ring frame room *The third | architecture_firm = | structural_engineer = | other_designers = | awards = | engine_date = 1906 | engine_decommissioned = 1958 | engine_maker = [[Buckley and Taylor of Oldham]] | engine_type = marine type vertical triple expansion engine | engine_valve = | engine_cylinder = 63-inch diameter low-pressure cylinder | engine_rpm = 64 | engine_kWatt = | engine_ihp = 1800 ihp sometimes loaded to 2000 ihp | engine_fly_diameter = {{convert|26|ft|m}} | transmission_type = rope | no_of_ropes = 26 ropes | boilers = ? Dual Lancashire ? | boiler_temperature = | psi = | spindles = 60000 | references = {{cite web|url=http://dunkerley-tuson.co.uk/regentmill.aspx|title=Dunkerley-Tuson Family Website, The Regent Cotton Mill, Failsworth|last=Dunkerley|first=Philip|accessdate=2009-01-09}} }}
Microformat
The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates
If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.
If it has a URL, use {{URL}}.
Please do not remove instances of these sub-templates.
Classes
hCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision
When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name=
parameter.
Tracking category
See also